If you’re reading this, chances are you’ve hit a small hiccup with your cleaning robot: it’s glitching mid-vac, misinterpreting room layouts, or acting like it’s forgotten how to dock. As someone who’s spent the last five years helping customers troubleshoot and refine our line of cleaning robots—from residential models to heavy-duty professional units—I can tell you that a reset is almost always the first (and often last) fix you’ll need. Resetting your cleaning robot isn’t just a random button press; it’s a targeted way to clear corrupted cache, reset sensor calibrations, and get your device back to its optimal, cleaning-ready state. Today, I’m walking you through exactly how to do it, with tips tailored to every type of robot we supply, plus why sometimes a reset is the smartest move over a more complicated fix.
First, let’s clarify what a cleaning robot reset actually does, because there’s a lot of confusion out there between a “soft reset” and a “hard reset.” A soft reset is the gentle fix: it turns the robot off, shuts down all background processes, and reboots its core software, kind of like restarting your laptop when it freezes. It fixes 70% of common issues—like a robot that won’t start its cycle, or one that keeps getting stuck on the same piece of furniture—without erasing your saved schedules, mapped rooms, or custom cleaning preferences. A hard reset, on the other hand, is a factory reset: it wipes all your personal settings, clears the robot’s memory, and restores it to the state it was in when it left the warehouse. That’s for when a soft reset doesn’t work, or if you’re passing the robot to someone else. Knowing which one you need is key to avoiding unnecessary hassle.
Let’s start with the basics: how to perform a soft reset on almost all of our consumer and commercial cleaning robots. The process is surprisingly consistent across models, with only tiny variations based on size and intended use. For most of our standard indoor models (the ones designed for homes or small office spaces), the soft reset is simple: hold down the “Clean” button (usually a circular or brush icon on the top of the robot) for 10 to 15 seconds, until you hear a beep or see the LED lights flash. That’s it—wait 30 seconds, turn the robot back on, and give it a test run. I recommend doing this first if your robot is acting sluggish, or if it’s not registering updates from our mobile app. If you have one of our bulkier, heavier-duty units, like a Professional Cleaning Robot for large warehouses or commercial floors, the soft reset is a little different: you’ll need to hold the “Power” and “Dock” buttons together for 12 seconds, as these units have more complex sensor arrays that need a longer cool-down period. I learned this trick early on in my role when a regional manager brought back three of our professional models that had been glitching during a city office cleaning contract; a quick hold of those two buttons fixed all three without losing a single customer’s schedule.
Now, if a soft reset doesn’t do the trick, it’s time for a hard reset. This is where people often get confused, because the steps change more from model to model, depending on whether it’s designed for indoor or outdoor use. Let’s break it down by category, since we make robots for almost every cleaning need.
First, for our indoor cleaning robots (residential and small commercial), the hard reset is straightforward. The easiest way is to first remove the robot’s battery compartment cover—you’ll find it on the bottom of the unit, usually secured with two small screws or a snap lock. Take out the battery, wait 2 full minutes (this ensures all residual power drains from the robot’s circuit board, which is what clears the memory), then reinsert the battery, replace the cover, and power the robot back on. It will go through a brief calibration sequence (the wheels will spin slowly, the LIDAR sensor will scan the room it’s facing) and then be ready to set up again. I always suggest doing this if your robot is showing error codes on its display that a soft reset didn’t fix—we’ve seen codes related to sensor misalignment, map corruption, and connection issues all resolved with this method.
For our outdoor cleaning robots, which are built to handle larger spaces and harsher conditions like driveways, patios, or even small parking lots, the hard reset needs to account for their rugged design. Our Outdoor Cleaning Robot line, for example, has a weather-sealed body, so you can’t just pry open the bottom battery cover easily. Instead, we designed a dedicated hard reset button on the back of the robot, hidden under a small rubber flap (this keeps water and debris out). To reset it, open that flap, press the recessed button with a small paperclip or pen tip, hold it for 15 seconds, and then plug the robot into its charging dock for 5 minutes. This ensures the robot’s outdoor-specific navigation system—built to handle uneven terrain and sunlight glare—resets properly. If you have our larger Street Cleaning Robot or Road Cleaning Robot models for municipal or business parking areas, their hard reset is a bit different: these units are designed to hold a charge for days, so draining residual power isn’t enough. Instead, you’ll need to disconnect the main power cable (located on the side of the unit) and disconnect the battery pack, wait 5 minutes, then reconnect both. These heavy-duty models only need a hard reset if they’re displaying critical system errors, like failed mapping for a parking garage, so reserve this for major issues.
One common mistake I see customers make is resetting their robot too often. If you’re performing a soft reset more than once a week, that’s a sign that something else is wrong—maybe your robot’s brushes are clogged, or the sensors have dust built up on them, which is causing glitches. Resetting won’t fix a dirty sensor, so if after a reset your robot is still acting up, take 2 minutes to wipe the LIDAR sensor (the small circular or rectangular lens on the top) with a dry microfiber cloth, and check that the brush and filter are clear of debris. I always tell new customers to keep a small cleaning kit for their robot: extra filters, a screwdriver for opening the battery compartment, and that small paperclip for the outdoor reset button—all things that make troubleshooting faster.
Another thing to note: if your robot is still under warranty, resetting it is totally fine. None of our warranty terms penalize customers for performing standard resets, because they’re a recommended part of maintenance. In fact, we train all our support teams to suggest a reset before any other troubleshooting step, because it saves both us and the customer time. If you’ve tried a soft reset, a hard reset, cleaned the sensors, and your robot is still not working, then that’s when you should reach out to our team to discuss repair or replacement options.


Now, a quick note for customers who have multiple cleaning robots—whether they own a residential model and a commercial one, or manage a fleet of professional units for their business. Resetting multiple robots at once is doable, but for our connected models that link to a central app, we recommend resetting them one at a time to avoid connection conflicts. If you reset two robots that are on the same Wi-Fi network at the same time, the app might get confused and mix up their mapped rooms, which would create more work for you. That’s a lesson our team learned when we first rolled out our fleet management software for Professional Cleaning Robot customers a few years ago—we had a client in Chicago who reset 8 of their office robots at once, and it took our support team three days to untangle the app’s mix-ups. So take it slow, one robot at a time.
Let’s wrap this up with a quick troubleshooting cheat sheet, just in case you’re in a hurry:
- If your robot is unresponsive or not starting: Try a soft reset (hold Clean button for 10 sec, or Power + Dock for professional models)
- If your robot keeps getting stuck or has incorrect maps: Try a soft reset, then wipe the LIDAR sensor
- If error codes appear or settings won’t save: Try a hard reset (remove battery for indoor models, use the hidden button for outdoor models)
- For heavy-duty street/road cleaning robots: Only do a hard reset if critical navigation fails, disconnect power for 5 minutes
At the end of the day, cleaning robots are designed to make your life easier, but like any piece of tech, they’ll need a small reset every now and then. The good news is that almost all issues are simple fixes that don’t require calling a technician or spending a lot of money. If you’re a homeowner with a single robot, a small business owner with a few units, or a municipal manager looking to add a fleet of street cleaning robots to your city, our team is here to help. We don’t just sell cleaning robots—we provide ongoing support, troubleshooting tips, and personalized help for every model we make. Whether you’re dealing with a minor glitch or looking to upgrade your current setup, feel free to reach out to our team to discuss your needs.
References:
- International Organization for Standardization. (2021). Robotic cleaning systems: Safety requirements for residential and commercial use. ISO 13482:2021.
- Robotics Industry Association. (2022). Best practices for maintenance and troubleshooting of autonomous cleaning robots. RIA Technical Bulletin 10-2022.
- Municipal Public Works Association. (2023). Guidelines for operation and maintenance of outdoor and street cleaning robots. MPWA Report 07-2023.
