What kind of maintenance do AGV AMR robots require?

Nov 11, 2026

Leave a message

Sophia Anderson
Sophia Anderson
Sophia is a technical support engineer. She provides professional technical support to customers, helping them solve various problems related to the company's robot products. Her expertise and patience have won high praise from customers.

If you’re running a warehouse, manufacturing floor, or any space where you need moving heavy stuff without breaking a sweat, chances are you’ve thought about adding some AGV AMR robots to your team. I’m from a company that supplies these things full-time, and let me tell you—when we first started working with clients, a ton of folks asked the same question: “Do these things even need maintenance? Or do I just plug them in and forget about them?” Spoiler alert: they’re not set-it-and-forget-it gadgets (as much as I wish they were). But their maintenance is way simpler than fixing a truck or a conveyor belt, and if you stay on top of it, they’ll run like a dream for years.

First, let’s make sure we’re on the same page with what we’re talking about. A lot of people mix up AGVs and AMRs, but for anyone new, AGV stands for Automated Guided Vehicle—these are the older, more rigid ones that follow fixed lines or magnets on the floor. AMR is Autonomous Mobile Robot, which is the newer, cooler version that can navigate around obstacles on its own, learn new routes, no lines needed. We sell both, honestly—some warehouses still swear by AGVs for their straight-line tasks, and others upgrade to AMRs for flexible work. If you want to see the full range of what we offer, head over to our AGV AMR Robots page. Today, though, we’re focusing on maintenance for both, since a lot of clients buy a mix to fit different needs.

Let’s start with the basics everyone can handle—no fancy tech degree required, and you can do most of this stuff without a team of engineers. First up: daily quick checks. This is something anyone on the floor can do in 5 minutes before their shift starts, right before they send the robots out. What do you look for? First, their wheels and tires. These things are rolling around 10, 15 hours a day, 5 days a week, so their tires take a beating. If you see chunks of rubber missing, or dirt packed so hard between the wheels that they can’t spin smoothly, that’s a problem. I’ve had a client where dust from their manufacturing area got stuck in the wheel hubs, and after a month, the robots were veering off their routes—big waste of time. So daily, yank the wheels off (it’s super easy, we send a little tool with every robot) and brush out any dirt, debris, or metal shavings if you’re in a shop floor. Also, check the tire pressure if yours are pneumatic—some of the newer models have solid rubber, but the ones that do need air can lose pressure over time, which makes them less stable when carrying heavy loads.

Next, the sensors. This is where AMRs really shine—they use LIDAR, cameras, and bumpers to avoid running into pallets, coworkers, or other robots. But if those sensors get dirty or misaligned, they’re useless. For daily checks, take a quick look at the LIDAR scanner on top of the robot—if there’s grease, dust, or tape on the lens, it can’t “see” obstacles. Same with the front and side cameras. We recommend wiping those down with a soft microfiber cloth every day—no harsh chemicals, just water, because anything too strong can scratch the lens and mess with their vision. Also, check the bumpers: those are the soft rubber parts around the base that trigger a stop if the robot bumps something. If a bumper is cracked or loose, it might not trigger the stop when it needs to, which could lead to a crash. I had a small client last year who skipped checking bumpers, and a robot ran into a stack of boxes, broke a camera, and took it offline for 3 days—total rookie move, but it happens.

Then there’s the battery. This is the heart of the robot, so if you mess up maintenance here, you’re looking at big costs to replace it. Most AGV and AMR robots use lithium-ion batteries now, which are way better than the old lead-acid ones, but they still need care. Daily, when the robot is done for the shift, don’t just plug it in if it’s not dead—wait until it hits around 20% charge, that’s the sweet spot for lithium-ion. Charging them when they’re almost empty or overcharging all the time shortens their life. Also, once a week, check the battery terminals—make sure there’s no corrosion, which looks like white or green powder. If there is, you can clean it with a little baking soda and water, dry it completely, and tighten the connections. If you ignore corrosion, the battery won’t charge properly, and you’ll have to replace it way earlier than you should. We usually tell clients their batteries will last 3-5 years if you do this right, but I’ve seen people kill them in 18 months because they plugged them in wrong all the time.

Now, weekly maintenance—this is a little more involved, takes 30 minutes to an hour, and is perfect for a maintenance tech who’s already on staff. First, do a deep clean of the whole robot. Wipe down the frame, get rid of all the dust and grime that daily checks miss, especially around the motor and the wheel gears. If you’re in a food warehouse, crumbs and sticky stuff can build up and attract pests, which is another problem. For manufacturing spaces with metal shavings, make sure you get every last bit out—those can get into the motor and cause it to overheat.

Also, during weekly checks, you should run a quick navigation test. If you have AMRs, send them on a couple of their usual routes and see if they’re avoiding obstacles correctly, if they’re stopping at the right spots, if they’re not veering off. For AGVs, since they follow fixed lines, check to make sure the magnetic tape or floor lines are still intact—sometimes forklifts will run over them, or floor polishers will wear them down, so if a line is faded or scratched, the AGV will lose its way. If you need to replace lines or magnets, it’s cheap and easy, but skipping that will make your AGVs useless.

Another weekly thing: check all the software updates. I know, software sounds scary, but most of the time, we push updates remotely, and you just click “install” on the robot’s tablet or dashboard. These updates usually fix small bugs, improve navigation, or add new features—if you skip them, the robot might start acting weird, like taking too long to turn, or not noticing a new obstacle that you put down. We always remind clients that these updates are free, and they take 10 minutes, so don’t ignore them.

Then monthly maintenance—this is for when you want to catch bigger problems before they turn into breakdowns, and it’s something we can even help with if you don’t have a tech on staff. First, inspect the drive motors. These are what make the wheels spin, so if they’re not working, the robot doesn’t move. You don’t need to take them all apart, just check their temperature when the robot’s been running for a while—if it’s way hotter than usual, like too hot to touch for more than a second, that’s a sign something’s wrong. Also, listen for weird noises: grinding, squeaking, or clicking that wasn’t there before. That usually means the gears inside the motor are worn, and if you catch it now, you can replace the gears for a few hundred dollars, instead of the whole motor for a couple thousand.

Also, monthly, check all the cables. The ones connecting the battery to the motor, the sensors, the dashboard. Make sure none of them are frayed or loose—vibrations from the robot moving around can make connections come loose, and frayed cables can cause short circuits. I had a client once who had a cable hanging loose in their warehouse, and when a robot ran over it, it tripped the whole robot’s power—lost a whole day of work because of a $5 cable we could have replaced for $20. Don’t let that happen to you.

Another monthly task: calibrate the sensors. Even if you wipe them down every day, sometimes they get off-kilter from the robot bumping something, or from changes in lighting (super common in warehouses that load and unload at night, when the lights are off). Calibrating is easy—we send step-by-step guides with every robot, and it just takes 10 minutes. For LIDAR scanners, calibration makes sure the “map” the robot has of your space is accurate, so it doesn’t get confused by a new pallet stack or a new shelf. If you skip calibration, you might have robots going where they shouldn’t, which is a safety hazard and a waste of time.

Now, what about if something does go wrong? Don’t panic. Most of the time, it’s a small fix. But here’s the thing—regular maintenance stops most problems before they start. A lot of clients wait until the robot breaks, then call us in a panic, but 9 times out of 10, that issue would have been caught with weekly or monthly checks. That’s why we always tell people: maintenance isn’t a chore, it’s saving you money. Replacing a wheel is $50, replacing a battery is $1,500, replacing a whole robot is way more. It’s way cheaper to spend 30 minutes a week checking things than to deal with a total breakdown.

Also, if you’re still on the fence about which type to get, let’s talk about where these robots work best. If you need a fixed route for moving pallets from the loading dock to the storage racks, an AGV is a solid choice. If you have a dynamic space where you’re rearranging shelves a lot, or moving different things to different spots, an AMR is better because it can adapt. We have a whole page about how AMRs fit into warehouses, which you can check out AMR in Warehouse, and if you’re specifically looking for warehouse-specific robots, head over to Warehouse AMR. For anyone comparing AGVs and AMRs side by side, our Mobile Robot AGV page breaks down the differences, so you can pick what’s right for your space.

Wait, I should also mention something about safety maintenance, because these are working around people, right? So every quarter, do a safety check. Make sure the emergency stop buttons on the robot, the remote control, and the dashboard all work. If you press the emergency stop, the robot should freeze immediately—no dragging, no slow down. Also, check the E-stop cables or buttons for any damage. I once worked with a warehouse where a forklift ran over an E-stop cord, and when a robot needed to stop fast, it couldn’t, and it bumped into a worker (nobody got hurt, but it was a close call). That’s the kind of thing a quartery check catches.

Also, don’t forget to keep good records. Write down every time you do maintenance—when you changed a tire, when you calibrated the sensors, when you charged the battery, when you noticed a weird noise. If you keep a log, you’ll start to see patterns: like every 3 months, the left wheel gets clogged with debris, so you can adjust your daily checks to pay extra attention to that side. Or your batteries only last 3 years instead of 5, so you can change how you charge them. Records are super helpful, especially if you have multiple robots.

Let me be real with you—maintaining AGV and AMR robots isn’t brain surgery. It’s basic upkeep, like taking care of a car: check the tires, change the oil, check the brakes, don’t ignore weird noises. If you skip the small stuff, you end up with big headaches. I’ve been in this industry for 10 years, and I’ve seen it all—clients who do 5 minutes a day and their robots run for 7 years, and clients who never check anything and replace a robot every other year. The difference is just consistency.

Mobile Robot AGVWarehouse AMR

If you’re looking to add these robots to your operation, or you already have some and need help setting up a maintenance plan, our team is here to help. We can walk you through daily checks, send you custom maintenance schedules for your specific robots, and even do on-site maintenance if you don’t have your own tech. We’ve worked with all kinds of spaces—small warehouses, big manufacturing plants, retail distribution centers—and we know what works for each.

So if you’re ready to stop letting your robot sit idle for unnecessary repairs, and start getting the most out of your AGV or AMR robots, reach out to us to chat. We can answer all your questions about maintenance, pick the right robots for your space, and make sure you’ve got a plan to keep them running smoothly for years.

References

  1. International Organization for Standardization. (2020). Safety of autonomous mobile robots. ISO 13482:2020.
  2. Robotics Industries Association. (2022). AGV and AMR maintenance best practices. RIA Publication 15.06.
  3. Samsung Electronics. (2021). Lithium-ion battery care for industrial mobile robots. Tech Whitepaper.
  4. Boston Dynamics. (2023). Autonomous mobile robot navigation calibration and upkeep. Field Maintenance Guide.
Send Inquiry
Send Inquiry